The Model MF100 is designed to provide high pressure rating and excellent meter accuracy in an inexpensive package. Model MF100 meters are manufactured to comply with the applicable provisions of the American Water Works Association Standard No. C704-02, and latest revision for propeller type flowmeters. The model MF100 is designed for a maximum continuous working pressure of up to 150 psi and is fitted with AWWA Class D flanges. The impeller and drive assembly are easily accessed through the open end of the meter tube. As with all McCrometer propeller flowmeters, standard features include a magnetically coupled drive, instantaneous flowrate indicator and straight-reading, six-digit totalizer. 

Impellers are manufactured of high-impact plastic, capable of retaining their shape and accuracy over the life of the meter. Each impeller is individually calibrated at the factory to accommodate the use of any standard McCrometer register, and since no change gears are necessary, the MF100 can be field-serviced without the need for factory recalibration. Factory lubricated stainless steel bearings are used to support the impeller shaft. The sealed bearing design limits the entry of materials and fluids into the bearing chamber providing maximum bearing protection. 

An instantaneous flowrate indicator is standard and available in gallons per minute, cubic feet per second, liters per second and other units. The register is driven by a flexible steel cable encased within a protective vinyl liner. The register housing protects both the register and cable drive system from moisture while allowing clear reading of the flowrate indicator and totalizer.


Standard installation is horizontal mount. If the meter is to be mounted in the vertical position, please advise the factory. A straight run of full pipe the length of ten pipe diameters upstream and two diameters downstream of the meter is recommended for meters without straightening vanes. Meters with optional straightening vanes require at least five pipe diameters upstream and two diameters downstream of the meter.  


  • Forward/reverse flow measurement
  • Register extensions
  • All stainless steel construction
  • High temperature construction
  • “Over Run” bearing assembly for higher than normal flowrates
  • A complete line of flow recording/control instrumentation
  • Flow straightening vanes
  • Certified calibration test results
  • Canopy boot 

Escribe opinión

Nota: No se permite HTML!
    Malo           Bueno


  • Marca: Mc CROMETER
  • Referencia: MF100
  • Disponibilidad: En Stock
  • $0.00

  • Sin Iva: $0.00

Productos Relacionados



DESCRIPCIÓN Los medidores para irrigación modelo ML100 se elaboran para suministrar mediciones precisas de flujo a presiones moderadas en un paquete económico. La hélice y el ensamble de transmisi..

$0.00 Sin Iva: $0.00

MW500 / MZ500

MW500 / MZ500

DESCRIPCIÓN Los medidores de propela de línea principal modelos MW500 y MZ500 están fabricados para cumplir con las regulaciones aplicables de la Norma de American Water Works Association No. C704..

$0.00 Sin Iva: $0.00

Etiquetas: MF100, propela, medidor de flujo propela, Propela, Medidor de Flujo Propela, McCrometer, mccrometer