The CX200 is a microprocessor based timer/counter housed in a
standard 15 terminal CYCL-FLEX® plug-in case. Time or count
operation, time range, and standard or reverse start operation is
selected by 7 miniature rocker switches located inside the unit housing.
Time or count setpoints are entered into the unit using a sealed
membrane keypad on the front of the unit. Each digit in the setpoint is
individually increased or decreased by pressing the appropriate keypad
switch. Time or count setpoint and progress is displayed on the front of
the unit by a 4 1/2 digit liquid crystal display with .5 inch digits. Time or
count subtracts from the setpoint and the output changes state at zero.
Operational mode annunicators also appear in the display area on the
front of the unit. The mode annunciator flashes when the unit is timing
■ Five time ranges from 19.999 sec. to 199 hrs.: 59 min.
■ Two count rates - accept and display counts from 1 to 19999
■ Two relay outputs - socket mounted for easy replacement
■ Two form C instantaneous contacts and two form C programmed
■ N.O. solid state MOSFET, delayed action switch rated at 1 ampere
continuous load current, 0-264 VAC 50/60 Hz or DC
■ Ideal output for switching low level signals and high voltage loads
due to MOSFET output's ON resistance of 0.5 ohm and very low
■ Programmed outputs operate in one of four load sequences; OOX,
OXO, OOX with pulse output, and OOX pulse output with repeat
■ Standard start is defined as ON delay reset timer or counter
■ For standard start units, timer/counter resets on power failure
■ Reverse start or OFF delay units will not reset on power failure and
will continue cycle when power is restored
Setting Accuracy: Time: ±0.1% or 50 ms, whichever is larger (0˚ to 60˚C)
Count: 100% Repeat Accuracy:
Time: ±0.001% of setting or 35 ms, whichever is larger (0˚ to 60˚C)
Count: 100% Reset Time: 30 ms following voltage removal from simulated clutch input
(CR1) Power on Response: 300 ms maximum after voltage applied to terminal 11 Operating Temperature: +32˚ to +140˚F (0˚ to +60˚C) Output Rating: Relay: 10 amp (resistive), 120 VAC
Mechanical Life: 20 million operations
Electrical Life: contingent upon controlled load
Solid State: 1 amp, 0-264 VAC, VDC Vibration: Unit function is unaffected by 2.5G sinusoidal vibration magnitude
in both directions of the perpendicular mounting axes imposed from
10 to 100 Hz Static Discharge: Unit function is unaffected by a constant 3600 volt peak,
60 Hz discharge applied to the grounded front plate at a relative humidity
of less than 25% Battery Life: The CX uses a lithium battery with an expected life of 10
years Agency Approvals: UL Recognition E96337
CSA Certification LR26861
1205 SeriesA popular 6-digit totalizer featuring heavy duty diecast construction that can really take the severe punishment found in so many industrial applications. Orginally designed over 50 years a..
HK Time TotalizerThe HK5 series totalizes the "ON" or running time of electrically operated equipment. Its features include:■ Large, easy to read digits ■ Dust proof dial cover ■ Maintenance free ■ Hi..
HP5 CYCL-FLEX® Reset TimerThe HP5 CYCL-FLEX® series timer is a high quality, synchronous motor
driven reset timer housed in the standard CYCL-FLEX® plug-in housing.■ 16 standard time ranges from 5 se..