C628 AWESOME Elapsed Timers


The Veeder-Root brand C628 Elapsed Timer is a member of a family of 1/8 DIN instruments which offer breakthrough display technology as well as easy-to-program user setup. Its large LED display features the ability to change color based on process status such as exceding the preset value. Therefore, when monitoring an application's elapsed time, the C628 can provide operators with an instant visual alert to changes in the application's status.


■ AWESOME 0.71” high digit LED display (27% larger than other 1/8 DIN units)
■ Programmable color change display based on an event
■ Programmable help function and secondary legend display
■ Programmable for single input or cumulative operation
■ Choice of NPN or PNP primary input
■ Filter speed settable for 20, 200, or 10,000 Hz
■ Standard outputs: 1 NPN transistor & 1 relay
■ Front panel reset enable and preset/alarm lockout
■ Optional RS-485 plug in card
■ CE approved, UL, CUL recognized


The C628 Elapsed Timer has a definable set value at which an output will activate. The unit can be programmed to operate in a cumulative (elapsed time continues to accumulate during all instances when the input is active) or single (time value will display the elapsed time of an individual input and will reset to zero for each successive new pulse) input function mode. In addition, the time format (seconds, minutes, hours, minutes & seconds, or hours & minutes) and timing direction (up or down) can be selected.


SPECIFICATIONS


Count Inputs: Sinking/Sourcing or Contact Closure Frequency: 10 kHz max. Logic Low ≤ 2.0 VDC, Logic High ≥ 3.0, 30V max.

Impedance: 10 KΩ to common - Sourcing; 4.7 KΩ to +Voltage - Sinking

Control Inputs: Sinking, Edge Sensitive Logic Low ≤ 2.0 VDC, Logic High ≥ 3.0 Impedance: 4.7 KΩ to +Voltage Response Time: 25 ms Functions: Input 1 - Remote Reset; Input 2 - Security Lockout

OuTputs: Solid State: NPN open collector, 30 VDC max., 100 mA max. Relay: SPDT, 2 A resistive@ 110 VAC Latency: 75 µ seconds, plus 8 ms for relay pull-in

Communication: RS-485; Serial asynchronous, UART to UART; Open ASCII: One start bit, even parity seven data bits, one stop bit; Baud Rate selectable from 9600, 4800, 2400, or 1200 Maximum Zones: 99

Supply Voltage: 90-264 VAC, 50/60 Hz, or 20-50 VAC/VDC; 4 Watts

Accessory Power Supply: 9-15 (unregulated VDC), 125 mA max.

Display: Red/Green, 7 segment LED Primary display: 5 digits, 0.71" (18mm) height Secondary display: single digit, 0.3" (7mm) height

Time Formats: Seconds, Minutes, and Hours: XXX.X Minutes & Seconds and Hours & Minutes: XX.XX

Dimensions: 48mm x 96mm, 110mm deep

Mounting: Panel mount (mounting bracket supplied), 45mm x 92mm cutout

Connections: Screw type terminals - combination head

Front Panel Rating: NEMA 4X/IEC IP65

Case Material: GE Lexan 940 Weight: 0.56 lbs.

Operating Temp.: 0° to 55° Celsius, 32° to 131° Fahrenheit

Storage Temp.: -20° to 80° Celsius, -4° to 176° Fahrenheit

Relative Humidity: 20% to 95% non-condensing

Approvals: CE, UL, CUL




Escribe opinión

Nota: No se permite HTML!
    Malo           Bueno

C628 AWESOME Elapsed Timers


Productos Relacionados

CX200 / CX300 / CX400

CX200 / CX300 / CX400

CX200 Microprocessor Timer/CounterThe CX200 is a microprocessor based timer/counter housed in a standard 15 terminal CYCL-FLEX® plug-in case. Time or count operation, time range, and standard or rev..

$0.00 Sin Iva: $0.00

HK Time Totalizer

HK Time Totalizer

HK Time TotalizerThe HK5 series totalizes the "ON" or running time of electrically operated equipment. Its features include:■ Large, easy to read digits ■ Dust proof dial cover ■ Maintenance free ■ Hi..

$0.00 Sin Iva: $0.00

HP5 CYCL-FLEX® Reset Timer

HP5 CYCL-FLEX® Reset Timer

HP5 CYCL-FLEX® Reset TimerThe HP5 CYCL-FLEX® series timer is a high quality, synchronous motor driven reset timer housed in the standard CYCL-FLEX® plug-in housing.■ 16 standard time ranges from 5 se..

$0.00 Sin Iva: $0.00

DG100 MINIFLEX® Solid State Timer

DG100 MINIFLEX® Solid State Timer

DG100 MINIFLEX® Solid State TimerThe DG100 is a solid state timer housed in a 1/8 DIN, molded NORYL® case. The timer uses CMOS integrated circuits for the timing function. The DG100 series timer is ..

$0.00 Sin Iva: $0.00

BRE Reset Timer

BRE Reset Timer

BRE Reset TimerDESCRIPTION BRE enclosed construction with front facing dial and knob. The BRE timer has a heavy duty terminal block, with 9 screw terminals that will readily accept 16 gauge wire co..

$0.00 Sin Iva: $0.00

A103 Preset Timer

A103 Preset Timer

A103 Preset TimerThe A103 Preset Timers are amazingly compact in size and low in cost, with a full complement of popular features such as field programmable Up or Down timing and Interval or ON-dela..

$0.00 Sin Iva: $0.00

Etiquetas: CONTROL DE TIEMPO, MOD. C628, VEEDER-ROOT